EAGLE6 computer for telescopes and astrophotography

EAGLE6 is the most advanced all-in-one computer for telescopes and astrophotography, combining powerful new features to simplify remote control and power management while allowing you to use astronomy devices and Windows softwares of your choice. Housed in the innovative PLUS aluminum body designed for easy telescope installation and cable management, EAGLE6 includes a Windows 11 Enterprise computer with fast 128GB NVMe Industrial Grade SSD and 8 GB of DDR4 3200 MHz RAM. Its ten USB ports (including 2 USB-C) and seven 12V power out ports let you power and control all your 12V devices, including dew heaters, with precision and reliability.

New features include Lights-Out Management (LOM), allowing remote power-on and monitoring of sensors via a dedicated Ethernet port, even when the computer is powered off, Observatory Actions, with CTRL-IN and CTRL-OUT ports for easy remote control of devices like mounts and domes and WiFi 6E (802.11ax) providing faster speeds, reduced latency, and less interference. Additional advanced features include GPS sensor, EYE sky brightness monitor, Inclinometer, Motion detector, DARK mode to disable LEDs, and GHOST mode to replace USB cables for PrimaLuceLab devices with wireless connectivity.

EAGLE6 sets a new standard in astrophotography, offering unmatched control, automation, and features to your telescope!

EAGLE is the open platform for telescopes: you can use your preferred devices and Windows softwares.

Replace your standard laptop or desktop computer with an EAGLE and you will spend less time setting up your equipment and more time imaging! Since EAGLE combines, in one device, a Windows 11 computer to the most advanced remote control and power management system for telescopes, it allows you to use your preferred devices and Windows software from any manufacturer without limitation, while also offering many advantages and features you can’t find in a standard computer. PrimaLuceLab’s engineers designed the EAGLE all-in-one solution (design protected by European Patent EP3335078) to be used with any telescope. By connecting data and power cables to the EAGLE, when the telescope moves, all the cables will move accordingly, reducing the opportunity for cable snags and providing the best solution for your cable management. All you need is a single power cable from your battery or AC adapter to your EAGLE!

EAGLE6 computer for telescopes and astrophotography: scope of delivery.

• EAGLE6 computer
• 2 WiFi antennas
• 1x GPS antenna
• 12V power cable with cigarette plug for EAGLE – 250cm
• n.4 M6x6 screws + n.4 M6x8 screws + n.4 M6x10 screws + n.4 M6x12 screws + n.4 M6x18 screws + n.4 M6x25 screws + n.4 M6x35 screws
• Quick guide